Create HTTP Load Balancer

Origin server subset rules provide the ability to create match conditions on incoming source traffic to the HTTP load balancer using country, ASN, regional edge (RE), IP address, or client label selectors for subset selection of destination (origin servers).

As prerequisites, (1) create a label (key-value pair), (2) in origin pool configuration, add labels to one or more origin servers, (3) and then in the Other Settings subsection, select Enable Subset Load Balancing. Add one or more keys to origin server subset classes. Choose a setting for subset fallback policy. The default option is to select any origin server.

• Enable the Show Advanced Fields option.

• Under Origin Server Subset Rules, select Configure.

• Select Add Item.

• In the Name field, enter a name for the rule.

• From the Action field, select Add Label and select the same label(s) that you assigned to origin servers in the origin pool configuration.

• Optionally, select a country from the Country Codes List menu.

• From the Client Selector Match menu, select an option to match on label selectors.

• From the Source IPv4 Match menu, select an option to match on client IP address.

• From the Source ASN Match menu, select an option to match on client ASN.

• In the Regions Edges section, select Add Item to select an RE to match traffic to.

• After you finish, select Apply.

An API definition is a structured inventory of your API (endpoints, methods, and the expected request/response structure). When you enable an API definition, it establishes a reference baseline that improves API visibility, governance, and detection accuracy.

Some detection mechanisms require an API definition to operate correctly, while others use it to improve precision and reduce false positives. Although it is optional, F5 strong recommends that you enable an API definition for your production environments.

• From the API Definition menu, select whether to use an API definition. The default value is Disable, meaning an API definition is not used for this load balancer.

• If you select Enable:

  • From the API Definition menu, select the API definition.

  • To create a new definition, select Add item.

• From the Validation menu, select an option to perform OpenAPI specification validation. Following are the options:

  • Disabled: Default option. No validation is performed.

  • All Endpoints: Validate all endpoints listed in the OpenAPI specification file. Any other endpoints not listed will act according to Fall Through Mode.

  • Custom List: Define API groups, base path, or API endpoints and their validation modes. Any other endpoints not listed will act according to Fall Through Mode.

Note: OpenAPI Validation is a feature that ensures API traffic complies with the specified schema and can block or report non-compliant traffic. Validation can be configured on a per-endpoint, per-group, or per-base-path basis. The Fall Through Mode allows for identifying and handling Shadow APIs by either blocking, reporting, or allowing them. Allowed IPs list can be created to pass OpenAPI Validation by specific IP addresses.

• From the OpenAPI Validation Processing Mode menu, select whether to Validate or Skip.

• From the Validation Enforcement Type menu, select an option to specify the type of enforcement.

• From the Request Validation Properties menu, select one or multiple options from the following:

  • Query Parameters: The incoming requests are validated against the query parameters specified in the API definition.

  • Path Parameters: The incoming requests are validated against the path parameters specified in the API definition.

  • Content-type: The incoming requests are validated against the content-types specified in the API definition.

  • Cookie Parameters: The incoming requests are validated against the cookie parameters specified in the API definition.

  • HTTP Headers: The incoming requests are validated against the HTTP headers specified in the API definition.

  • HTTP Body: The incoming requests are validated against the HTTP body specified in the API definition.

• From the Fall Through Mode menu, select an action for every request that targets endpoints which are not in validation list.

• Select Configure in the API Protection Rules field.
• See the Configure API Protection Rules guide for more instructions.

This feature allows you to cryptographically verify incoming JSON web tokens (JWTs) before they are passed to origin APIs. This can prevent JWT replay attacks, JWT tampering, and it can block requests with expired tokens or tokens that are not yet valid.

• Under JWT Validation, select Configure.

• From the Target menu, select whether to perform validation on all endpoints, specific API groups, or a specific path.

• Target location(Bearer) will look for the JWT token in the Authorization HTTP header with Bearer authentication scheme.

• From the Action menu, select whether to block or report if the JWT is not valid. See the following options:

  • Report action: In monitoring mode, the request is allowed to pass through, and the security event is logged.

  • Block action: The request will be blocked, a 401 Unauthorized error will be returned, and the security event is logged.

• Under JSON Web Key Set (JWKS), select one of the following options from the drop-down:

  • Local Input: To use a JSON Web Key Set (JWKS) in JSON format, select Local Input. The Keys are statically configured within the Load Balancer

    • Select Configure.
    • In the text box that appears, copy and paste the JWKS used for authorization with the server.
    • Select Apply.

  • Authorization Servers: To use one or more Authorization Servers, select Authorization Servers.

    • In the Authorization Server Name field, select an existing Authorization Server, or add a new one by configuring the JWKS URI.

      • Select Add Item.
      • In the Name field, enter a name for the new load balancer.
      • Optionally, select a label and enter a description.
      • In the JWKS URI field, provide the URI of the Authorization Server.

    The platform automatically fetches the JWKS from the configured JWKS URI.

    Note: The JWKS refreshes every 24 hours. However, you can also fetch the JWKS manually from the list of Authorization Servers, if required.

• In the Reserved Claims Validation section, perform the following:

  • From the Issuer (iss) menu, select whether to match exactly the issuer’s reserved claim, or to disable this functionality. If you choose to match exactly, provide the exact match value in the corresponding field.

  • From the Audience (aud) menu, select whether to match exactly the JWT pre-configured value, or to disable this functionality. If you choose to match exactly, provide the exact match value in the corresponding field. You can add more than one value to match for using Add Item.

  • From the Validation Period menu, select Enable (default value) or Disable. Enable selection will validate the JWT expiration and not before (nbf) values (if present in the request token). Disable selection will not perform validation against these fields. After you finish with configuration, select Apply.

• In the Mandatory Claims section, perform the following:

  • Select Add Item. Enter the name of the claim. It must match the claim already present in the payload, in the JWT. After you finish with configuration, select Apply. If you need to delete a claim, select ... and then select Delete.

API Discovery samples traffic through the load balancer to build a schema of an app's API endpoints, and it can generate a swagger definition file. Having API Discovery enabled also allows detection of attacks through the API, such as BOLA and BOPLA.

• From the API Discovery menu, select Enable to start the discovery process. The default value is Disable, meaning an API discovery will not be done.

• From the Learn From Traffic With Redirect Response menu, choose whether to enable learning from redirect traffic (requests resulting in a 3xx response code).

• In the Purge Duration for Inactive Discovered APIs (d), enter the number of days for the API endpoint to live. If no 2xx responses occur from an endpoint (or 3xx if so configured) occur for the span of days entered, then the API endpoint will be removed.

• Select Configure in the API repositories section to setup the API code repositories (for example, Github, Gitlab, BitBucket, or Azure Repos) to the load balancer as the source for API endpoint discovery.

This feature allows you to configure a policy for for how sensitive data is detected. You can specify which privacy or compliance frameworks (PCI_DSS, HIPAA, GDPR, etc.) to use when detecting sensitive data, you can disable specific sensitive data types, and you can add your own sensitive data types.

• Select Default to use system defaults for sensitive data discovery.

• Select Custom for a custom data discovery. Next select an existing policy from the Specify Sensitive Data Discovery drop-down list, or select Add Item in the list to create a new policy.

• For a new policy,

  • Enter a name for the policy and optionally labels and a description.
  • Select one or more entries from the Compliance Frameworks drop-down list. These frameworks will define the set of sensitive data types that will be detected.
  • For each specific sensitive data type you would like to disable (these will not be shown as sensitive in the API discovery), select Add Item under Disabled Built-In Sensitive Data Types and then select a data type from the drop-down list.
  • To define your own sensitive data types, select Configure in the Defined Custom Sensitive Data Types section. Next, for each data type you want to add, select Add Item to get a blank entry in the Defined Custom Sensitive Data Types List. Select an existing entry in the drop-down list or select Add Item in the list to create a new one.
  • For a new sensitive data type,
    • Enter a name an optionally labels and a description.
    • Select Configure to create the datatype rules. For each rule, select Add Item.
    • Select an entry in the Pattern Choice drop-down menu: Key Pattern, Value Pattern, or Key-Value Pattern.
    • Select an entry in the Pattern drop-down menu and then enter the value or substring to match.
    • Select Apply to save the detection rule and then select apply to save the rule list.
  • Ensure that Mark as Sensitive Data is checked.
  • Check Mark as PII if this data type is personally identifiable information (PII). This allows the system to classify discovered sensitive data appropriately.
  • Select Continue to save the new data type.
  • Select Apply to save the list of defined custom sensitive data types.

• Select Continue to save the new custom policy.

Once this feature is configured, you will be able to see which API endpoints contain sensitive data and which API compliance framework(s) they are governed by. These will be shown on the Overview > Security page under the API Endpoints tab. Make sure the Sensitive Data and API Compliance columns are visible to see the information. There, you can also see the information by examining the endpoint details. See Explore Security Monitoring for a Load Balancer for more information on monitoring.

This feature allows you to specify rules to mask sensitive data in API responses.

• Select Configure in the Sensitive Data Exposure Rules section.

• Select Add Item to create the first rule.

• In the Target section, enter the path that will respond to the request. Also enter one or more methods with responses containing sensitive information.

• In the Values field in the Pattern section, enter the JSON field value you want to mask. For example, given the JSON below is the response,

      { "user":
        { "Email":"elmer1980@yahoo.com",
          "ID":1,
          "altEmails":["elmo@sesamest.com, Mr.E@Muppets.net"]
        }
      }

• To mask the Email value, enter user.Email.
• To mask all emails in the array altEmails, enter user.altEmails[_]. Note that an underscore between the square brackets indicates the array's elements.
• Masked values in the response will be masked as follows: All letters changed to a or A (matching case) and all numbers converted to 1. Thus the response example above will be masked as shown below:

      { "user":
        { "Email":"aaaa1111@aaaaa.aaa",
          "ID":1,
          "altEmails":["aaaa@aaaaaaaa.aaa, Aa.A@Aaaaaaa.aaa"]
        }
      }

Note: To apply masking to nested objects, the exact location of the key must be specified. For the example shown below,

{
   "A": {
       "B": {
           "key1": "val1",
           "key2": "val2"
       }
   }
}

the masking configuration should be set as A.B.key1 or A.B.key2, depending on which value you want to mask.

• Select Apply to save the rule to the list of Sensitive Data Exposure Rules.

• Select Add Item to add more rules.

• Select Apply to save the list of rules to your load balancer.

• From the Service Policies menu, select an option for how to apply one or more service policies to this load balancer. The following options are available:

  

  Figure: Service Policy Configuration

  • Apply Namespace Service Policies: This option applies the service policies from the namespace to this load balancer.

  • Do Not Apply Service Policies: This option does not apply any service policies to this load balancer.

  • Apply Specified Service Policies: This option allows you to apply one or more specific service policies to this load balancer.

    

    Figure: Apply Specific Service Policy

    • Select Configure to add service policies.
    

    Figure: Select Specific Service Policy

    • In the Policies list, select a service policy, from the drop-down menu.
    • Use the Add Item button to add more policies to the list.
    • Select Apply when you're finished building the list.

The IP reputation service analyzes IP threats and publishes a dynamic data set of millions of high-risk IP addresses, to protect users from inbound traffic from malicious IPs. IP threat categories include Spam Sources, Windows Exploits, Web Attacks, BotNets, Scanners, Denial of Service, Reputation, Phishing, Proxy, Mobile Threats, and TOR Proxy.

For more information, see Deny Malicious IPs Using IP Threat Categories.

Threat Mesh provides F5 Distributed Cloud customers with an additional layer of protection against web application attacks. Threat Mesh leverages cross-customer correlation (i.e. correlation of client attacks across different customers) to identify malicious intent of a client. Whenever a client is flagged due to a malicious intent by our WAAP decisions engines, that client will be added to the ThreatDB.

Enabling Threat Mesh means that requests coming into an application from an IP that is in the ThreatDB will be automatically blocked by the load balancer.

Requests that are blocked due to Threat Mesh can be seen and evaluated in the Web App & API Protection workspace on the Overview > Security > Security Analytics tab for a specific load balancer and the Multi-Cloud App Connect service on the Overview > Applications > Security Analytics tab for a specific load balancer. Blocked requests will show as a Service Policy violation in the Event Type column with Threat Mesh in the Threat Name column. For more information, see Load Balancer Security Monitoring in the Security Analytics section.

From the Threat Mesh drop-down menu, select the Enable or Disable for the feature.

Select a user identifier for rate limiting and malicious user mitigation.

• From the User Identifier drop-down menu, select the method for user identification:

  • Select Client IP Address to use the user's IP address.

  • Select User Identification Policy to use the object to evaluate the identity. To create a new user ID, select Add item from the User Identification Policy menu.

Note: For more information, see Configure Rate Limiting.

Malicious User Detection performs user behavior analysis and assigns a risk score and threat level of low, medium or high based on the suspicious activity of the user. The risk score of the user is decayed over time, if no further suspicious activity is noticed. The feature can be configured also via external app_type and labeling this HTTP Load Balancer. In this case, the external app_type configuration overrides the internally disabled feature. Enabling the feature internally is allowed only when there is no labeling to an external app_type.

From the Malicious User Detection drop-down menu, select Enable.

• In the Common Security Controls section, enable the Show Advanced Fields option.

• From the Malicious User Mitigation And Challenges drop-down menu, select Enable. This option enables you to configure a challenge for users detected as malicious.

Note: For the JavaScript Challenge, Captcha Challenge, and Policy Based Challenge options, you can enable a challenge for all users and/or requests matching specific conditions. For any of these options, select View Configuration to create that challenge for users/requests that meet specific criteria.

• From the Malicious User Mitigation Settings menu, select an option for malicious users at different threat levels:

  • Default: Applies low, medium, and high levels.

  • Custom: Defines different levels and actions to take. Select an option from the Custom menu. Or select Add Item to create a custom option.

• From the JavaScript Challenge Parameters menu, select the type of JavaScript challenge to enable:

  • JavaScript Challenge Parameters: This option enables you to configure a custom JavaScript challenge for this load balancer. Select Configure. Set the delay value, cookie expiration value, and custom message to use. After you finish, select Apply. For more information, see Configure JavaScript Challenge.

  • Use Default Parameters: This option sets the default challenge with no customization.

• From the Captcha Challenge Parameters menu, select the type of captcha challenge to enable:

  • Use Default Parameters: This option takes the default settings and applies them.

  • Captcha Challenge Parameters: This option enables you to define the challenge parameters. Select Configure. Set the cookie expiration value and the custom message to use. After you finish, select Apply.

Rate Limiting allows you to control the rate of requests sent to your origin servers and protect against API traffic surge and denial of services attacks.

• To configure rate limiting, select an option from the list:

  • Disable: Default option. No rate limiting enabled for this load balancer.

  • API Rate Limit: Set rate limiting for specific API endpoints.

  • Custom Rate Limiting Parameters: Allows you to set custom parameters to rate limit.

Note: For detailed instruction to set up rate limiting, see Configure API Rate Limiting.

These rules define specific clients for which WAF processing and Bot Defense will be skipped. Add rules to allow trusted clients based on the match conditions configured. You can skip WAF, skip bot processing, or both. The match conditions include IP prefix, AS number, and HTTP headers to identify specific clients.

• To configure the Trusted Client Rules option:

  • Select Configure, and then select Add Item.

  • Complete the configuration process to add rules to allow trusted clients and to prevent the WAF from applying the block rules you previously configured.

  • Select Apply.

  • Select the newly created rules option and then select Apply.

You can choose match condition rules, such as IP prefix, AS number, and HTTP headers to identify specific clients to block from accessing your applications.

• To configure the Client Blocking Rules option:

  • Select Configure, and then select Add Item.

  • Complete the configuration process to add rules to block specific clients from making requests.

  • Select Apply.

  • Select the newly created rules option, and then select Apply.

The Cross-Origin Resource Sharing (CORS) policy is an HTTP-header based mechanism that allows a server to indicate any origins (domain, scheme, or port) other than its own from which a browser should permit loading resources.

• In the CORS Policy field, select Configure.

• To enable a specific origin server, select Add item under the Allow Origin field.

• To enable origin servers by regex, select Add item under the Allow Origin Regex field.

• In the Allow Methods field, enter information to be used for the access-control-allow-methods header.

• In the Allow Headers field, enter information to be used for the access-control-allow-headers header.

  Important: When you enable Bot Defense on your HTTP load balancer, Bot Defense adds the following headers to the Allow Headers field in your CORS policy: Xa4vrhYP3Q-a, Xa4vrhYP3Q-a0, Xa4vrhYP3Q-b, Xa4vrhYP3Q-c, Xa4vrhYP3Q-d, Xa4vrhYP3Q-e, Xa4vrhYP3Q-f and Xa4vrhYP3Q-z. These headers are required for Bot Defense to support requests that use CORS.

• In the Expose Headers field, enter information to be used for the access-control-expose-headers header.

• In the Maximum Age field, enter information in seconds to cache the headers.

• After you finish, select Apply.

From the VIP Advertisement drop-down menu, select from one of the options available:

• Select Internet to advertise the default VIP on the public network.

• Select Internet (Specified VIP) and enter an IP address in the Public IP field to advertise that IP as VIP on a public network.

• Select Custom. Select Configure in the Advertise Custom field, and then select Add Item for each site you want to advertise. Perform the configuration per the following guidelines for each site:

  • From the Select Where to Advertise menu, select an option for where a load balancer should be advertised.

    • Choose Site:

      • From the Network drop-down menu, choose a network type to be used on the site.
      • Select a Site Reference object from the drop-down menu.
      • Optionally enable the Show Advanced Fields option and enter an IPv4 and/or an IPv6 to be used as the VIP on the site.

    • Choose Virtual Site:

      • From the Network drop-down menu, choose a network type to be used on the site.
      • Select a Site Reference object from the drop-down menu.

    • Choose vK8s Service Network on RE:

      • Select RE or Virtual Site Reference from the drop-down menu.
      • Select a reference (RE or virtual site) from the associated Reference drop-down menu.

    • Choose Virtual Network:

      • Select a network reference from the Network drop-down menu.
      • Select Default V4 VIP or Specific V4 VIP from the Select V4 VIP drop-down menu. If you select a specific one, then enter the specific V4 VIP.
      • Select Default V6 VIP or Specific V4 VIP from the Select V6 VIP drop-down menu. If you select a specific one, then enter the specific V6 VIP.

    • Choose Segment on Site:

      • Select a segment from the Segment drop-down menu.
      • Select a site from the Site drop-down menu.
      • Enter the IPv4 address of the VIP on the site.
      • Enter the IPv6 address of the VIP on the site.

    • Choose Segment on Virtual Site:

      • Select a segment from the Segment drop-down menu.
      • Select a virtual site from the Virtual Site Reference drop-down menu.
      • Enter the IPv4 address of the VIP on the virtual site.
      • Enter the IPv6 address of the VIP on the virtual site.

    • Choose Segment on Cloud Edge:

      • Select a segment from the Segment drop-down menu.
      • Select a cloud edge from the Cloud Edge drop-down menu.
      • Enter the IPv4 address of the VIP on the cloud edge.
      • Enter the IPv6 address of the VIP on the cloud edge.

  • Configure a TCP listener port or select a default option for the TCP Listen Port Choice field. The default option sets port 80 for the HTTP load balancer and 443 for the HTTPS load balancer.

  • Select Apply to save the site to advertise to the list. Then select Apply to save the list of sites to advertise.

• Select Do Not Advertise to disable VIP advertisement.

Note: If you have enabled Internet VIP on the AWS cloud site to allow clients to access Load Balancer VIP directly from the internet, set the VIP Advertisement selection to Custom, and then configure the custom VIP advertisement to advertise on a Site or Virtual Site with Site Network set to either Outside Network with internet VIP or Inside and Outside Network with internet VIP. For more information, see Create AWS Site.

Note: The following ports are not supported for advertising on a Distributed Cloud Services site:

• K8s node port range 28000-32767
• Distributed Cloud Services port range 65000-65535
• 10249
• 10250
• 10251
• 10252
• 10256
• 10257
• 10259
• 1067
• 18091
• 18092
• 18093
• 18095
• 22
• 22222
• 2379
• 23790
• 23791
• 2380
• 23801
• 23802
• 323
• 4500
• 500
• 53
• 5355
• 6443
• 68
• 8005
• 8007
• 8087
• 8443
• 8444
• 8505
• 8507
• 9007
• 9090
• 9153
• 9999

• From the Load Balancing Algorithm menu, set how the HTTP/HTTPS requests are load balanced. The options include:

  • Round Robin: This option sends requests to all eligible servers in a round robin fashion.

  • Least Active Request: This option sends requests to an origin server that has least active requests set.

  • Random: This option sends requests to all origin servers randomly.

  • Source IP Stickiness: This option sends requests to all origin servers using the hash value of the source IP.

  • Cookie Based Stickiness: This option sends requests to all origin servers using the hash value of the cookie. The cookie can be passive or generated. The consistent hashing algorithm, ring hash, is used to select the origin server. Requires you to further configure the parameters.

  • Ring Hash Policy: This option sends requests to all origin servers using the hash value of the request. Requires you to further configure the parameters.

Figure: Load Balancer Control

• If you select Cookie Based Stickiness:

  • In the Name field, enter a name for the cookie.

  • Optionally, set a TTL value in milliseconds and set a path name value.

• If you select Ring Hash Policy:

  • Select Configure to specify a list of hash policies to use.

  • Select Add Item.

  • From the Hash Policy Specifier drop-down menu, select what to apply the hash policy to. The options include:

    • Cookie: Hash policies are applied to a cookie.

    • Header Name: Hash policies are applied to the name of key of the request header used to obtain the hash key.

    • Source IP: Hash policies are applied to the source IP address.

  • In the Name field, enter a name for the cookie that is used to obtain the hash key.

  • To apply the hash policy as a terminal policy, select the Terminal option.

  • Select Apply.

  • Select the newly created hash policy, and then select Apply.

• Select the Enable from the Trusted Client IP Headers drop-down menu.
• Use Add Item button to add one or more headers. The headers are processed in the numerical order they are added, as shown on the page.

When trusted client headers are enabled, system uses real client IP address as the source IP, instead of the proxy's IP address. The following apply when configuring trusted client IP headers:

• When multiple headers are configured, F5 Distributed Cloud platform follows top to bottom precedence. This means initially first header is considered and system checks for its availability in the request. If not present in the request, system proceeds to check for the second header, and so on, until one of the listed headers is found.
• When none of the configured headers exists, or the value of the configured header is not an IP address, then the source IP of the packet is used.
• When multiple IP addresses are available in header value, system reads the rightmost IP address, and considers it as real Client IP address. However, when using the X-Forwarded-For header, and if multiple IPs are available in value, the system reads the rightmost-1 IP address, and considers it as real client IP address.

Note: See Overview of Trusted Client IP Headers in F5 Distributed Cloud Platform for more information.

• Select the Add Location checkbox to specify the regional edge (RE) site name in the header responses.

• Select Configure in the More Options field and perform the configuration per the following guidelines:

  • In the Header Options section, you can add details in each of the request headers and response headers fields to specify add and remove headers accordingly.

    • Add Request Headers: This section allows you to manage headers attached to incoming HTTP requests. Select Add Item to begin adding a request header rule. Enter the name of the header and the value you want to add or modify. For example, you can add a header X-Custom-Header with value CustomValue. Ensure that you save any modifications made.

      Note: If you are the admin of the HTTP Loadbalancer, you can insert custom request headers to the requests going to origin servers (or clients). The values for these HTTP headers can be constructed using regex, variables, and static strings. You can also chain multiple regex, variables, and static strings. For example, you can insert a header with the name new-req-header and value "$[request_header_Host]---proto:$[protocol]-anydummystring". So, for a HTTP request with the "Host:f5.com" header, the request header "new-req-header: f5.com---proto:http-anydummystring" is inserted. * Add Response Headers: This section allows you to control headers included in the outgoing HTTP responses. Select Add Item to create new rules for response headers. Specify the header key and the value you want to include or modify in the outgoing response. For example, you can add a header X-Cache-Status with value Hit. Ensure that you save any modifications made. Note: If you are the admin of the HTTP Loadbalancer, you can insert custom response headers to the responses going to origin servers (or clients). The values for these HTTP headers can be constructed using regex, variables, and static strings. You can also chain multiple regex, variables, and static strings. For example, you can insert a header with the name new-resp-header with the value "$[response_header_transfer-encoding]---proto:$[protocol]-anydummystring". So, for a HTTP/1.1 response with the "Transfer-encoding: chunked" header, the response header "new-resp-header: chunked---proto:HTTP/1.1-anydummystring" is inserted.

  • In the Configure Error Response Options section, select Configure to customize error responses.

  • In the Miscellaneous Options section, select Configure. Complete the configuration options.

• Select Apply.

• Wait for the DNS Info and Certificate status to display the VIRTUAL_HOST_READY and Certificate status Valid values.

Figure: Load Balancer Created

• Verify that the requests to your virtual host domain are processed and load balanced between the configured origin servers.

Note: The Certificate expiration date column displays the expiration date for the certificates. Certificates managed by F5 Distributed Cloud Services are issued for 90 days and auto-renewed after 75 days from the date of issuance.

• Verify that the Certificate status field shows Domain Challenge Pending.

• Select > to view the load balancer information in JSON format.

• Verify that ACME challenge record exists under get_spec > auto_cert_info > dns_records field in the JSON. The record name starts with _acme-challenge and the value is the name of the TXT record created by Distributed Cloud Services.

• Create a CNAME record with the obtained ACME challenge name and value in your DNS server.

• Verify that the Certificate status field value changes to Certificate Valid.

• Verify that the Certificate expiration date field value displays the expiration date for the certificates.